Quad ESL-2905

Statt 4.498,00 EUR
Nur 4.268,00 EUR

(inkl. 19% MwSt. zzgl. Versand)
 
Artikeldatenblatt drucken
Art.Nr.: Quad ESL-2905
Lieferzeit: ca. 3-4 Tage ca. 3-4 Tage
Weiterempfehlen
Quad ESL-2905
Quad ESL-2905
Quad ESL-2905
Quad ESL-2905
Quad ESL-2905
Quad ESL-2905

The new ESL-2805 and ESL-2905 Electrostatics are Quad's latest reference loudspeakers and like their predecessors should be regarded amongst the finest loudspeakers in the world today. In areas such as transparency, and lack of colouration, they are without peer.

It should be noted that whilst moving-coil loudspeakers are the norm, the physical principles upon which they work are fatally flawed - and not even the latest advances in materials science can address their shortcomings.

Quad alone has sought a different path - to push the boundaries of electrostatic technology to the point where our ESLs are closer to the ideal loudspeaker than any other.

Quad's patented panel technology results in a combination of the speed and accuracy only possible from an electrostatic loudspeaker; together with the imaging and sound-staging only possible from a theoretically ideal point source; and the coherence and continuity of a single drive unit.

With possibly the lowest distortion of any loudspeaker, the ESL can be enjoyed for hours on end without fatigue; never adding or subtracting from the original recording. Even at low volume levels, they retain the full detail and drama of the music. In short, the Quad ESL technology is unique in its clarity of sound, lack of distortion, lack of interference and continuity of response. The ESL-2805 and ESL-2905 loudspeakers are the absolute pinnacle of that technology. Engineered without compromise, they are destined to become modern classics.

Construction
Format
Type
Membrane
Panel Elements
Time Delay
Chassis Structure


Acoustic Performance
Maximum Output
Sensitivity

Impedance
Impedance Variation
Maximum Input



Frequency Response
Distortion (100dB at 1m)



Electrical
AC Input
Power Fuse

General
Power Consumption
Dimensions (HxWxD)
Weight





Floor-Standing Dipole with 3˚ Tilt Back
Full-range Electrostatic
Ultra Low Mass (0.5g/m2) Tensioned Film
6
Progressive Concentric Rings
Heavy Duty Composite Aluminium / Steel
2N/m2 at 2m on axis


1.5 mbar per volt referred to 1m.
(86 dB/2.83V rms equivalent)

8 Ohms nominal
4 - 20 Ohms
Continuous input voltage (rms): 10V
Programme peak for undistorted output: 40V
Permitted peak input: 55V
32Hz - 21kHz (-6dB)
28Hz - 23kHz (useable)
Above 1000Hz 0.15%
Above 100Hz 0.5%
Above 50Hz . 1.0%

220-240V or 110-120V
63mA anti-surge, 200-240V
100mA anti-surge, 100-120V

6 Watts
1430mm x 695mm x 385mm
(add 25 - 55mm for feet)
Net 41.6kg
 


X Merkzettel
Mindestbestellmenge: 2